Registrado em: Qui Mar 29, 2007 5:24 am
Mensagens: 1800
Localização: São Bernardo do Campo
|
Salve Pessoal,
Como alguns ja sabem fechei uma parceria com a marca Team Powers, resolvi abri esse topico para mostrar um pouco dos produtos fabricados pela marca.
Topico para troca de informações, setups, dicas, etc: viewtopic.php?f=13&t=33305
A Team Powers tem varios produtos no mercado como:
Motores:
Modelo Plutonium (sensored):
Especificações:
- Design Specification: Based on IFMAR/ROAR/EFRA/BRCA
- Motor Dimensions (Diameter x Length) 35.8mm x 51mm
- Shaft Diameter: 3.17mm
- Magnet Dimensions (Diameter x Length): 12.35mm x 24mm(3.5turn~9.5turn), 12.3mm x 24mm(10.5turn~17.5turn)
- Variable End bell with changing the output power and torque of the motor
- Weight: ~165g (5g lighter than the old version)
- Recommended RC Model Car: 1:10 model car, Buggy, MINI Car
- Available Turns: 3.5T, 4T, 4.5T, 5T, 5.5T, 6.5T, 7.5T, 8.5T, 9.5T, 10.5T, 11.5T, 13.5T, 17.5T, 21.5T
Manual:
http://www.team-powers.com/manual/TPBLM ... 09_eng.pdf
  
Modelo Plutonium (sensorless):
Especificações:
Sensorless
- Motor Dimensions (Diameter x Length): 35.8mm x 51mm
- Shaft Diameter: 3.17mm
- Magnet Dimensions(Diameter x Length): 12.5mm x 24mm
- Fixed Endbell
- Weight: ~170g
- Avaliable Turns: 3000KV, 3300KV, 3700KV, 4000KV, 4300KV
- Recommended RC Model Car: 1:10 Touring Car, MINI Car, Tamiya M03 car
Modelo Super Lite:
Especificações:
- Motor Dimensions (Diameter x Length): 35.8mm x 45mm
- Shaft Diameter: 3.17mm
- Magnet Dimensions (Diameter x Length): 13mm x 18mm
- Variable End bell with changing the output power and torque of the motor
- Weight: ~140g (around 30g lighter than the standard size brushless motor)
- Recommended RC Model Car: F1, 1:10 MINI Touring Car, Tamiya M03 car
- Available Turns: 6.5T, 7.5T, 8.5T, 9.5T, 10.5T, 13.5T, 17.5T
 
Speed´s:
Modelo XPS Pro V1.1 -140A
Especificações:
- Support 4.0T or over
- Hard Case Dimension:
~33mm(Length) x ~33mm(Width) x ~21mm (Height)
- Weight: ~42g (not include wiring and fan)
- Support most kinds of sensor brushless motors in RC model 1/10th, 1/12th Car & Truck
- Support Turbo mode function for modify and stock mode motor
- One touch On/Off switch which are built on top of speed control.
- Use the pocket-size LCD program card to program the controller settings
- Multiple protection functions: Low voltage cut-off protection, Overheat protection, Throttle signal loss protection
-Manual Power profile: It can adjust the setting of the throttle/ brake power profile
Modelo XPS Sport V1.1 -70A
Especificações:
- Support 6.5T or over
- Hard Case Dimension:
~33mm(Length) x ~33mm(Width) x ~21mm (Height)
- Weight: ~42g (not include wiring and fan)
- Support most kinds of sensor brushless motors in RC model 1/10th, 1/12th Car & Truck
- Support Turbo mode function for modify and stock mode motor
- One touch On/Off switch which are built on top of speed control.
- Use the pocket-size LCD program card to program the controller settings
- Multiple protection functions: Low voltage cut-off protection, Overheat protection, Throttle signal loss protection
-Manual Power profile: It can adjust the setting of the throttle/ brake power profile
 
Baterias de Lipo:
Modelo: 7.4V 6800mAh 70C LiPo battery
Especificações:
- Battery Capacity: 6800mAH
- Continuous Discharge Capacity: 70C
- Hard Case Dimension:
~138mm(Length) x ~47mm(Width) x ~25.1mm (Height)
- Weight: ~315g
Modelo: 7.4V 4400mAh 60C LiPo battery(94mm) (otimas para formulinhas)
Especificações:
- Battery Capacity: 4400mAH
- Continuous Discharge Capacity: 60C
- Hard Case Dimension:
~94mm(Length) x ~46.5mm(Width) x ~25mm (Height)
- Weight: ~235g
Modelo: 3.7V 6400mAH 70C LiPo Battery (para carros 1/12th)
Especificações:
- Battery Capacity: 6400mAH
- Continuous Discharge Capacity: 70C
- Hard Case Dimension:
~92.5mm(Length) x ~46mm(Width) x ~18.5mm (Height)
- Weight: ~155g
Pneus Pre-Montados:
Modelos (densidade): 36R, 40R
- Include 4pcs per set
- Pre-Glue and ready to run
- High grip and suitable for all asphalt track
- Longer lifetime
 
Aditivo para Pneus:
Espeficicações:
- Colorless, Odurless
- Suitable for all asphalt tracks
- The best kept secret from TITC 2011, Mighty Gripper V2 traction compound offer the ultimate grip
Parafusos de Titanium:
Medidas
Cabeça "Chata" = 3x6mm, 3x8mm, 3x10mm, 3x12mm, 3x14mm,
Cabeça "Arredondada" = 3x5mm, 3x6mm, 3x8mm, 3x10mm, 3x12mm, 3x14mm, 3x16mm, 3x18mm
 
Silicones para Amortecedores, Diferenciais
Especificações:
- Higher thermal stability
- Low surface tension
- High compressability
Densidades:
WT: 25, 30, 35, 40, 45, 50, 55, 60, 65, 70
WT: 1000, 2000, 3000, 4000, 5000, 6000, 7000, 8000, 9000
WT: 100000, 200000, 300000, 400000, 500000
 
Pinhões Pitch 64P e 48P
Especificações:
- Hard-Coated
- Durable-
- High Precision
- Low friction
Medidas:
64P: 24 a 40
48P: 18 a 33
 
Chaves:
Ball Driver Hex Wrench 2.0x120mm
Ball Driver Hex Wrench 2.5x120mm
Ball Driver Hex Wrench 3.0x120mm
Phillips Head ScrewDriver 2.0x120mm
Phillips Head ScrewDriver 3.5x120mm
Phillips Head ScrewDriver 5.0x120mm
Flat Head ScrewDriver 3.0x150mm
Flat Head ScrewDriver 5.0x150mm
Allen Wrench 1.5x120mm
Allen Wrench 2.0x120mm
Allen Wrench 2.5x120mm
Allen Wrench 3.0x120mm
Nut Driver 4.5x100mm
Nut Driver 5.5x100mm
Nut Driver 7.0x100mm
  
Acessorios:
High Downforce Body Holder
Plugs 4mm
Fios de silicone 12AWG
Frente do Motor Aliviado
 
 
Fans:
30x30x10mm:
Descrição:
- Non-Magnetism: The fan will not be magnetized which reduce the fan speed due to the magnetic rotor inside the Brushless Motor
- Revolution: 10000rpm @ 5V, 15000rpm @ 7.2V
- Supply Voltage: 5V~7.2V
- Ball Bearing System
- Air Flow: 4.6 CFM
- Pressure: 6 mmAq
- Noise: 33 dBA
25x25x7mm:
Descrição:
- Non-Magnetism: The fan will not be magnetized which reduce the fan speed due to the magnetic rotor inside the Brushless Motor
- Revolution: 8000rpm @ 5V, 13000rpm @ 7.2V
- Supply Voltage: 5V~7.2V
- Ball Bearing System
- Air Flow: 4.2 CFM
- Pressure: 6 mmAq
- Noise: 27 dBA
Para encomendas favor entrar em contato atraves de MP, MSN, Email
_________________ 
|
|
Entrar 
Registrar
Créditos
FAQ
Galeria de fotos
Pesquisar 
