[VENDA] Esc Turnigy 100A + Programming card + Ubec 7,5A

rogeriomila · **Enviado:** Sex Jan 16, 2009 9:00 am

Galera,

Só sobrou o esc + cartão de programação + ubec !!! Ótimo para fazer conversão de GP para EP, porém NÃO TEM FREIO !!! Alias tem freio mas é aquele que quando para de acelerar freia !!!

Apenas R$ 300,00 tudo !!!

Segue as especificações de cada item abaixo:

TURNIGY Plush 100amp Speed Controller
This besc is mounted on a precision made PCB, it also has an oversized heatsink held tight against the FETs with screws.
This esc can handle large motors up to 100A and 6S
Specification
Constant Current: 100A Burst Current: 105A
BEC Mode: Linear BEC: Opto Only
Lipo Cells: 2-6 Lipo Cells: 2-4
NiMH: 5-18 Weight: 125g
Size: 78x55x15mm
WARNING:
For some large motors, you must use High timing mode. Failure to do so will result in a burnt esc.

TURNIGY BESC Programming Card
This device plugs inbetween the Rx and the speed controller. It allows the user to program the BESC according to a series of LED indicators.
It has buttons at the bottom so you can navigate through the menu and select the feature you want, then change it. Its very simple and is much easier than listening to jingles or a series of beeps.

TURNIGY 5-7.5A (8~42v) HV UBEC for Lipoly
The all new Turnigy 7.5A UBEC is an advanced switching DC-DC regulator which will supply a constant 5A or more with short bursts of up to 7.5amps. The Turnigy UBEC plugs into a 3 - 10 Cell Lipoly pack and supplies a constant 5 or 6v to your receiver.
The system includes an anti-short circuit and overheat function with a thin metal shield cover, reducing noise
Also included is an Output filter to reduce noise, an on/off switch and a step down regulator adapter.
Chip efficiency is 92%.
Specification
Output (Constant): 5v/5A or 6v/5A Input: 8v-42v (3-10cell lipo) High Voltage
Size: 48x27x9mm Weight: 37g
Quiescent current: 20mA Type: Switching, however because of the noise reduction (thin metal case & filter) this unit gives the same noise as a Linear BEC.

Segue algumas fotos:

Fotos dos equipamentos antes de montar no carro:
Imagem